power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 1 * restrictions on hazardous substances, european union directive 2011/65/eu. pin configuration 2 functional schematic ordering information 1 part number package maap - 011146 - std bulk quantity maap - 011146 - str500 500 piece reel maap - 011146 - 001smb sample board 1. reference application note m513 for reel size information. 1 ground 11 ground 2 rf input 12 rf output 3 ground 13 power detector 4 ground 14 reference 5 gate 1 bias 15 ground 6 gate 2 bias 16 no connection 7 gate 3 bias 17 ground 8 ground 18 drain 2 bias 9 drain 3 bias 19 drain 1 bias 10 ground 20 ground 21 3 paddle features ? 24 db small signal gain ? 41 dbm third order intercept point (oip3) ? >2 w output p1db ? 35 dbm saturated output power ? integrated power detector ? bias 1330 ma @ 6 v ? lead - free 7 mm cavity package ? rohs* compliant description the maap - 011146 - std is a power amplifier assembled in a 7 mm surface mount package with a temperature compensated integrated power detector operating from 21.15 to 23.65 ghz. the circuit provides 24 db gain, 41 dbm oip3, 2 w p1db and 35 dbm saturated output power. the device includes esd protection and by - pass capacitors to ease the implementation and volume assembly of the packaged part. this power amplifier is specifically designed for use in point - to - point radios for cellular backhaul applications in the 23 ghz band. 2. all no connection pins should be grounded. 3. the exposed pad centered on the package bottom must be connected to rf, dc and thermal ground.
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 2 electrical specifications : v dd = 6 v, i dq 4 = 1330 ma, t a = +25c 4. adjust v g 1, v g 2 and v g 3 between - 1.2 and - 0.6 v to achieve specified i dq (i dq = i d 1+i d 2+i d 3). v g 1, v g 2 and v g 3 are nominally the same voltage. small signal gain db 21.7 24.0 28.3 p sat dbm 34 35 output ip3, +20 dbm scl dbm 39.25 41.00 output ip3, +24 dbm scl dbm 37.25 39.00 p1db dbm 34 input return loss db 15 output return loss db 10 detector v diff , pout= +20 dbm v 0.5 1.1 1.7 noise figure db 6 gain ripple over frequency db 2 gate voltage v - 0.60
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 3 absolute maximum ratings 5,6,7 parameter rating input power 18 dbm drain voltage (v d 1,2,3) 7 v gate voltage (v g 1,2,3) - 3 v drain to gate voltage (v d - v g ) 10 v current (i dq = i d 1+i d 2+i d 3) 2000 ma detector pin 6 v detector reference pin 6 v detector pout 35 dbm junction temperature +175c storage temperature - 65c to +150c maximum operating ratings 8,9 parameter rating pdiss 11.2 w junction temperature +150c operating temperature - 40c to +85c 5. exceeding any one or combination of these limits may cause permanent damage to this device. 6. macom does not recommend sustained operation near these survivability limits. 7. operating at nominal conditions with t j +150c will ensure mttf > 1 x 10 6 hours. handling procedures please observe the following precautions to avoid damage: static sensitivity these electronic devices are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these cdm class 2, hbm class 1b devices. 8. channel temperature directly affects device mttf. chanel temperature should be kept as low as possible to maximize lifetime. thermal resistance, jc, is 5.8 c/w. 9. for saturated performance, it is recommended that the sum of (2v dd + abs (v gg )) < 15 v.
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 4 typical performance curves: 8 w quiescent bias, v d = 6 v input return loss gain gain, oip3, oip5, oip7 @ p in = - 6 dbm per tone output return loss p1db p3db
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 5 5 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 5 typical performance curves: v d = 6 v gain @ 22.2 ghz gain @ 21.2 ghz oip3 @ 21.2 ghz oip3 @ 22.2 ghz
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 6 6 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 6 typical performance curves: v d = 6 v gain @ 23.7 ghz gain @ 22.7 ghz oip3 @ 22.7 ghz oip3 @ 23.7 ghz
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 7 7 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 7 typical performance curves: 8 w quiescent bias, v d = 6 v lower and upper intermodulation tones @ 21.2 ghz lower and upper intermodulation tones @ 22.2 ghz detector delta voltage vs. output power lower and upper intermodulation tones @ 22.7 ghz oip3 vs. output power lower and upper intermodulation tones @ 23.7 ghz
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 8 8 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 8 biasing - all gates should be pinched - off (v g < - 2 v) before applying drain voltage (v d = 6 v). then the gate voltages can be increased until the desired quiescent drain current is reached in each stage. the recommended quiescent bias is v d = 6 v, i d 1 = 190 ma, i d 2 = 380 ma and i d 3 = 762 ma. the performance in this datasheet has been measured with fixed gate voltage and no drain current regulation under large signal operation. it is also possible to regulate the drain current dynamically, to limit the dc power dissipation under rf drive. to turn off the device, the turn on bias sequence should be followed in reverse. bias arrangement - each dc pin (v d 1,2,3 and v g 1,2,3) needs to have bypass capacitance (120 pf and 10 nf) mounted as close to the mmic as possible. power detector - as shown in the schematic below, the power detector is implemented by providing +5 v bias and measuring the difference in output voltage with standard op - amp in a differential mode configuration. application schematic evaluation board layout
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 9 9 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 9 package outline drawing and recommended land pattern ? ? meets jedec moisture sensitivity level 3 requirements. 6 all dimensions are in mm.
power amplifier, 2 w 21.15 - 23.65 ghz rev. v2 maap - 011146 - std 10 10 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 10 m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to spec- i f i c a t i o n s a n d p r o d u c t d e s c r i p t i o n s a t a n y t i m e , w i t h o u t n o t i c e . m a c o m m a k e s n o c o m m i t m e n t t o u p d a t e t h e i n- formation and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future chang- es to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
